ATM BC3-8 12" Channel Style Beam Clamp For 3-8" Beams, 2100lb WLL
Creating suitable overhead structural suspension points for rigging systems can be difficult using the building's own structure can provide more options for the installer. Standard, pre-engineered beam clamps attach to the building's beam ...
$241.92List Price: $302.40You Save 20%
The Light Source 6061-PI-1.5-S40-240B 1.5" Sch. 40 Pipe, 240" Long, Black
The Light Source 6061-PI-1.5-S40-240B standard grid pipe is 1.5" Schedule 40 Aluminum Pipe. The pipe is made of 6061-T6 Aluminum alloy has a minimum yield strength of 37,000 lbs and a minimum ultimate tensile strength of 40,000 lbs per ...
$119.63List Price: $150.00You Save 20%
Expected to ship out in 3-5 business days.
The Light Source MLB Mega-Coupler, Black
The standard Black Mega-Coupler # MLB. Has a 1/2" x 1 1/4" Hex Head Bolt with the Light Source Wing Nut. The Mega-Coupler has solid nut tabs that won’t break off. Mega-Coupler uses standard 0.5" by 1-1/4" long hex head ...
$19.87List Price: $26.75You Save 26%
The Light Source MAB Mega Clamp, Black
The Mega-Clamp is the world’s new standard theatrical lighting C-Clamp. The Mega-Clamp is created from high tensile, aircraft grade, extruded aluminum, so it’s both stronger and lighter than cast iron clamps. The Mega-Clamp’s safety ...
$9.62List Price: $12.95You Save 26%
The Light Source MGB Mega Grid-Lock, Black
Designed for permanent pipe grid installations in studios and theaters, The Light Source's MGB Mega-Gridlock joins 2 overlapping pipes together in a 90° joint. Grooves act as a wrench holding the nut from turning while installing. It ...
$11.70List Price: $15.75You Save 26%
Global Truss ST-132 13' Medium Duty Crank Stand, Max Load 220 Lbs
The Global Truss ST132 is a medium-duty hand-crank stand that can adjust to a height of just over 13 feet. NOTE: This model comes with Lighting Bar, but truss adapters are sold separately. Global Truss ST132 Specifications: Min. ...
$260.00List Price: $400.95You Save 35%
The Light Source SLCB Slim Claw, Black
The model SLCB is The Lighting Source's Slim-Claw, in black anodized, that will fasten to both 1-1/2 Schedule 40 pipe (1.90 OD) and 2 OD truss tube. The Claw has a 3-1/2 T-handle so no tools are required to fasten to the pipe. Comes with 1 ...
$26.55List Price: $35.75You Save 26%
The Light Source MWB Mega-Claw, Black
The new standard for hanging intelligent lighting fixtures. Allows one man to hang intelligent fixtures. Simply flip the link up, place clamp over the pipe and the Mega-Claw holds the weight of the fixture for you while you secure it with ...
$25.97List Price: $39.75You Save 35%
ETC C-Clamp Cast Iron C-Clamp
This C-Clamp from ETC is useful for mounting and locking lighting fixtures to a grid pipe and includes an M12 thread screw for the fixture yoke.
$18.90List Price: $21.00You Save 10%
ATM BC3-8-0 12" Channel Style Beam Clamp Without Eyebolts For 3-8" Beams, 2100lb WLL
Standard, pre-engineered beam clamps anchor to a building's beam structure and offer a safe and predictable method for suspending objects from overhead. This channel style beam clamp is adjustable, mounts flush underneath the beam's ...
$215.04List Price: $268.80You Save 20%
Altman B-50 50lbs Base For 1-1/2" Sch 40 Pipe
Bases are generally used in conjunction with standard iron pipe to create a variety of stands or supports. The B-10 base is generally used without pipe, that is, a fixture is directly mounted to the base. Bases may also be used as weights ...
$201.60List Price: $252.00You Save 20%
ATM BC3-8-2 12" Channel Style Dual Suspension Points Beam Clamp For 3-8" Beams, 2100lb WLL
Creating suitable overhead structural suspension points for rigging systems can be difficult so using the building's own structure can provide more options for the installer. The BC3-8-2 from ATM Fly-Ware allows you to attach to the ...
$259.84List Price: $324.80You Save 20%
Altman SC-36-BK 36" Safety Cable, Black
A steel cable that has a clip on one end and a loop on the other. It is intended to be threaded around a piece of hanging equipment and around a support structure, such as a pipe or a batten, and then clipped to it's loop. It then acts as ...
$6.40List Price: $8.00You Save 20%
ATM CC-096 96" BC Series Adjustable Tilt Cable Coupler With 1/4" Shackle, 220lb WLL
For loudspeaker cabinets with two suspension points, front to back, just one wire rope assembly is required and suspends to an AFGS-ARM-POINT instead of the steerable arm. The loudspeaker is tilted using the Tilt Cable Coupler between ...
$188.16List Price: $235.20You Save 20%
Altman 524-18 5' To 9' Telescoping Stand With 18" Round Base
Adjustable Stands are used to support lighting fixtures or other equipment from the floor. When a crossbar is added to the top of a stand, the combination becomes a light tree which will allow for the mounting of two or more fixtures, ...
$144.80List Price: $181.00You Save 20%
The Light Source UB2B Uni-Bolt For Unistrut Channel, Black
Uni-Bolt for fastening fixtures or pipes to strut Channel. Insert the Uni-Bolt into standard 1-5/8" by 1-5/8" strut channel, rotate 90° and spin the 2" diameter knurled disk to lock into the channel. Black finish.The Light Source UB2B ...
$16.72List Price: $22.50You Save 26%
ETC Safety Cable 30" Safety Cable
This black safety is 30" in length and is a useful Source Four fixture accessory.Specifications: Cable is a 30" long, 1/8" diameter black wire rope cable with snap clamp fitted. The safety ratio of the cable is 5:1 The breaking load ...
$9.90List Price: $11.00You Save 10%
The Light Source TCB TC Clamp, Black
The Light Source TC Clamp is a mounting clamp that fastens on 2" OD to 1.5" OD tubes. This black anodized clamp has a 2.5" T-handle so no tools are required to fasten to the pipe. Includes a 1.25" x 0.5"-13 TPI Grade 8 ...
$27.23List Price: $33.00You Save 17%
The Light Source MFBATB Mega-Folding Batten Clamp, Black
The Light Source offers the MFBATB - a Mega-Folding Batten Clamp that comes in Black Anodized aluminum. This one-piece batten clamp is the fastest way to hang 1-1/2" pipe and with its low profile on the bottom end of the batten makes it ...
$14.03List Price: $17.00You Save 17%
Global Truss Pro Swivel Clamp Heavy Duty Dual Swivel Clamp For 2" Pipe, Max Load 1100 Lbs
The Global Truss Pro Swivel Clamp is a heavy duty professional aluminum dual swivel clamp designed to work with 50mm tubing.Global Truss Pro-Swivel-Clamp Specifications: Compatible with F31-F32-F33-F34-F44P Truss Minimum Tubing Diameter: ...
$24.09List Price: $44.95You Save 46%
The Light Source MLSB Mega-Coupler Swivel, Black
The Swivel Coupler will fasten from 1-1/4" pipe (1.660" OD) to 2.050" OD truss tube. The Swivel-Coupler has wide wing nuts for fastening the clamp to the pipe or tube. The Swivel Coupler can be locked into a 90º fixed coupler by adding ...
$40.48List Price: $54.50You Save 26%
The Light Source MLB3/8CS Mega-Coupler With 3/8" Flat Head Bolt, Black
The Light Source's MLB3/8CS Mega-Coupler replaces the standard Hex Head bolt with a flat head countersunk bolt. This black Mega-Coupler has a 3/8" countersunk flat head bolt.
$19.87List Price: $26.75You Save 26%
Global Truss DT-QUICK GRID BLK Modular Grid Section For Moving Heads, Black
The Global Truss DT-QUICK-GRID-BLK matte black grid section can have up to 10 grids hung beneath it and is completely adaptable to different styles and configurations.Global Trusss DT-QUICK-GRID-BLK Specifications: Dimensions: 23.6" x 2" ...
$126.95List Price: $199.95You Save 37%
ATM BC7-12-2 16" Channel Style Dual Suspension Points Beam Clamp For 7-12" Beams, 1600lb WLL
Standard, pre-engineered beam clamps anchor to a buildings beam structure and offers a safe and predictable method of rigging grids, clusters, arrays and other objects from overhead. This channel style beam clamp is adjustable and mounts ...
$273.28List Price: $341.60You Save 20%